WP15 Hydraulic – 1.5″ Transfer Pump

WP15 Hydraulic - 1.5" Transfer Pump

$2,084.50 (Inc. GST)

High Output, Transfer Pump

  • 2 Bolt SAE Hydraulic Motor
  • Hyd. Motor Press 210 bar
  • Available in 2 Flows 6CC (21.6LPM) or 18CC (64LPM)
  • 1.5″ Suction and Discharge Ports
  • 350 lpm Discharge Capacity
  • Head 29 psi max
  • Silicon Carbide Mechanical Seals – MS
  • Viton Elastomers
  • Compatible for Diesel Fuel Pumping
  • Self-priming
  • Comes with Pumps Australia’s 1 Year Warranty


Flow Chart

*flow chart is based on 3,000RPM

Product Details

The WP15 HYD (1½” inch Inlet/Outlet) is an entry level model for higher volume pumping applications. Able to efficiently pump 350 litres per minute with an impressive head pressure of 20 meters (29psi max pressure). This hydraulic driven water pump is suitable for simple on-site or off-site de-watering or fluid transfer jobs. The WP15 HYD hydraulic driven water pump comes complete with viton elastomers throughout and a high end quality silicon carbide mechanical seals that are compatible for pumping diesel. The Impeller and Volute are made of a heavy duty cast iron, giving this pump a long life of pumping!

The WP15 HYD is definitely a quality backed product, recommended by many industries in the area of commercial, marine, mining, drilling, and industrial.

The Hydraulic Motor requires 6CC (21.6LPM) or 18CC (64LPM) @ 210Bar Pressure.

The hydraulic motor is a 2-Bolt SAE Configuration with High Tensile Cast Iron End Plates.


Additional information

Weight25 kg
Dimensions40 × 40 × 40 cm
Inlet size mm/inches


Outlet size mm/inches


Flow Rate (lpm/gpm)

350 / 92

Max head m


Engine model


Hyd. Motor Flow Req.

6CC(21.6lpm), 18CC(64lpm)

Hyd. Motor Max Press.

210 Bar

Hyd. Motor Max RPM


Weight kg


Category types

Hydraulically Driven Transfer Pump



There are no reviews yet.

Be the first to review “WP15 Hydraulic – 1.5″ Transfer Pump”

Your email address will not be published.

Enquire For WP15 Hydraulic - 1.5" Transfer Pump