The best high-pressure water nozzle would depend on the specific application and requirements. However, some commonly recommended high-pressure water nozzles include:
Turbo nozzle
Also known as a rotary nozzle, this type of nozzle sprays a concentrated, rotating jet of water that can effectively clean stubborn dirt and grime.
-
Fig 15BT – Bullet Turbo Nozzle 4000psi
$151.25 (Inc. GST) Select options This product has multiple variants. The options may be chosen on the product page -
FIG 16-1 Contractor Turbo Nozzle – 5100psi
$302.50 (Inc. GST) Select options This product has multiple variants. The options may be chosen on the product page -
Fig 17-2 Stainless Steel Turbo Nozzle – 11,650PSI
Read more
Fan nozzle
This type of nozzle sprays a wide, fan-shaped pattern of water that is ideal for rinsing and cleaning large surfaces such as decks, patios, and walls.
-
Fig 14-QC-040 High Pressure Nozzle Kit 4000psi (040 Size)
$71.39 (Inc. GST) Add to cart -
Fig 14-QC-030 High Pressure Nozzle Kit 4000psi (030 Size)
$71.39 (Inc. GST) Add to cart -
Fig 14 High Pressure Nozzle
$36.30 (Inc. GST) Select options This product has multiple variants. The options may be chosen on the product page
Adjustable nozzle
As the name suggests, this type of nozzle allows you to adjust the spray pattern from a focused, high-pressure jet to a wider, low-pressure fan spray.
-
Fig 11 Adjust Nozzle Holder – Small Rose 4000psi
$78.65 – $107.69 (Inc. GST) Select options This product has multiple variants. The options may be chosen on the product page -
Fig 9 Varijet Nozzle – 3200PSI
$96.80 (Inc. GST) Select options This product has multiple variants. The options may be chosen on the product page
Foam nozzle
This type of nozzle mixes water and detergent to create a foam that can be applied to surfaces for deep cleaning.
-
Fig 31-VHF Vortex Foamer High Flow
$324.50 (Inc. GST) Select options This product has multiple variants. The options may be chosen on the product page -
Fig 31 – Foamer
Read more
Typically, high-pressure water nozzles are designed to operate with pressures between 1000 and 5000 psi (pounds per square inch). Some models may be able to handle higher pressures, but it’s important to select a nozzle that is rated for the pressure of your pressure washer to ensure safe and effective operation.
These types of nozzles are generally made from materials that are resistant to corrosion and wear, such as stainless steel, brass, or ceramic. The choice of material can affect the durability and performance of the nozzle.
Additionally, the flow rate of high-pressure water nozzles can vary widely depending on the size of the orifice and the design of the nozzle. Most high-pressure nozzles have flow rates between 1 and 5 gallons per minute (gpm), but some specialty nozzles may have much higher or lower flow rates.
Also, the spray pattern of a high-pressure water nozzle can be adjusted by changing the angle of the nozzle or by using a nozzle with a different spray angle. The most common spray angles are 0, 15, 25, 40, and 65 degrees.
Another characteristic of these nozzles is the orifice size, these usually range from 0.02 to 0.06 inches, with smaller orifices producing higher pressures and larger orifices producing higher flow rates.
Furthermore, there are a variety of specialty high-pressure water nozzles available for specific applications, such as drain cleaning nozzles, foam spray nozzles, and surface cleaners. These nozzles are designed to optimize performance and efficiency for their specific application.
It’s important to note that the pressure and flow rate of the water source will also affect the effectiveness of the nozzle. Therefore, it’s recommended to consult with the team at Pumps Australia to select the most appropriate high-pressure water nozzle for your specific needs.
