Yanmar – 3TNV84T – 39HP

Yanmar – 3TNV84T – 39HP

ModelYanmar 3TNV84T
Max Output39.0MHP @ 2800rpm
Cylinders3
Cooling SystemRadiator
Bore x Stroke (mm)84 x 90
Displacement (litres)1.496
Dry Weight (Kg)150

SKU 3TNV84T Category

Description

3TNV84T

 

COMBUSTION CHAMBER

By investigating flow characteristics using experimental and numerical analysis methods, Yanmar research has achieved improved flowmixing in both the main chamber and the special mouth surrounding the injector. More efficient use of the incoming air charge results in cleaner burn and lower exhaust emissions.

FUEL INJECTION EQUIPMENT MECHANICAL PUMP

Instead of a PFR pump, a newly developed in-line pump has been used for the smaller TNV engines. Adjustments are made solely in the Yanmar`s own FIE factory ensuring precise compliance with regulations. Also the following features are incorporated: to conventional chambers.

  • Increased force is applied by the governor to quicken the fuel controlling rack response time.
  • Engine revs are more constant.
  • Emissions have been reduced by controlling fuel injection timing according to engine load.
  • Cam profiles are matched to nozzle throttle needs, which give a better-controlled injection rate.
  • Emissions are reduced.

DI ENGINE

  • Water Cooled by Radiator
  • Vertical Multi Cylinder
  • Most models Direct Injection (lower HP models IDI)

NOZZLE INSTALLATION ANGLE

The installation angle of the fuel injection nozzle is greater than that of conventional engines, so that uneven atomization of fuel between injections can be reduced. Excellent matching between intake swirl ratio and the shape of the combustion chamber results in uniform mixing of fuel in the combustion chamber. Therefore, performance including combustion efficiency, start ability, noise, and exhaust emission has been improved.

COMBUSTION CHAMBER

Fluid energy of the air and fuel charge is increased. The swirl effect produced in the chamber continues while combustion occurs, aiding mixing and results in lower exhaust emissions compared to conventional chambers.

FUEL INJECTION EQUIPMENT

A new MP pump has been developed especially for the TNV engine series. Our aim was to make improvements over a wide range of areas to even further reduce emissions. Features are:

  • High injection pressure
  • Use of a mono plunger reduces uneven injection between the cylinders.
  • Timing Control Device system optimizes injection to take into account speeds, loads and the startup phase.
  • New mechanical governor helps to maintain cleaner exhausts.
  • Minimal variation from chosen revs at low speed using constant pressure valve.

FUEL INJECTION NOZZLE

Multiple numbers of very small holes are used to achieve uniform atomization.

  • holes are not simply drilled, their inside edges are carefully rounded to promote even flow and direction of spray, also to reduce resistance.
  • Low sack nozzle profile improves combustion. Double corn shape protects from cavitations.

 

CYLINDER BLOCK NOISE REDUCTION

Yanmar’s original CAE techniques have optimized the stiffness, minimized transformation, and reduced radiant noise.

MUFFLER NOISE REDUCTION

Original CAE technique is used to design a muffler with optimized volumes and sound isolation materials.

For more information, please go to the specific engine model.

Additional information

Weight150 kg
Dimensions100 × 100 × 100 cm
Engine Brand

Yanmar

Engine model

Yanmar – 3TNV84T

Electric start engine

Yes

Cylinders

3

Power (hp)

39HP @ 2800rpm

RPM

2800

Weight kg

150

Category types

Stationary Diesel Engine – Yanmar

Documentation

Yanmar – 3TNV84T – 39HP

ModelYanmar 3TNV84T
Max Output39.0MHP @ 2800rpm
Cylinders3
Cooling SystemRadiator
Bore x Stroke (mm)84 x 90
Displacement (litres)1.496
Dry Weight (Kg)150

SKU 3TNV84T Category

Description

3TNV84T

 

COMBUSTION CHAMBER

By investigating flow characteristics using experimental and numerical analysis methods, Yanmar research has achieved improved flowmixing in both the main chamber and the special mouth surrounding the injector. More efficient use of the incoming air charge results in cleaner burn and lower exhaust emissions.

FUEL INJECTION EQUIPMENT MECHANICAL PUMP

Instead of a PFR pump, a newly developed in-line pump has been used for the smaller TNV engines. Adjustments are made solely in the Yanmar`s own FIE factory ensuring precise compliance with regulations. Also the following features are incorporated: to conventional chambers.

  • Increased force is applied by the governor to quicken the fuel controlling rack response time.
  • Engine revs are more constant.
  • Emissions have been reduced by controlling fuel injection timing according to engine load.
  • Cam profiles are matched to nozzle throttle needs, which give a better-controlled injection rate.
  • Emissions are reduced.

DI ENGINE

  • Water Cooled by Radiator
  • Vertical Multi Cylinder
  • Most models Direct Injection (lower HP models IDI)

NOZZLE INSTALLATION ANGLE

The installation angle of the fuel injection nozzle is greater than that of conventional engines, so that uneven atomization of fuel between injections can be reduced. Excellent matching between intake swirl ratio and the shape of the combustion chamber results in uniform mixing of fuel in the combustion chamber. Therefore, performance including combustion efficiency, start ability, noise, and exhaust emission has been improved.

COMBUSTION CHAMBER

Fluid energy of the air and fuel charge is increased. The swirl effect produced in the chamber continues while combustion occurs, aiding mixing and results in lower exhaust emissions compared to conventional chambers.

FUEL INJECTION EQUIPMENT

A new MP pump has been developed especially for the TNV engine series. Our aim was to make improvements over a wide range of areas to even further reduce emissions. Features are:

  • High injection pressure
  • Use of a mono plunger reduces uneven injection between the cylinders.
  • Timing Control Device system optimizes injection to take into account speeds, loads and the startup phase.
  • New mechanical governor helps to maintain cleaner exhausts.
  • Minimal variation from chosen revs at low speed using constant pressure valve.

FUEL INJECTION NOZZLE

Multiple numbers of very small holes are used to achieve uniform atomization.

  • holes are not simply drilled, their inside edges are carefully rounded to promote even flow and direction of spray, also to reduce resistance.
  • Low sack nozzle profile improves combustion. Double corn shape protects from cavitations.

 

CYLINDER BLOCK NOISE REDUCTION

Yanmar’s original CAE techniques have optimized the stiffness, minimized transformation, and reduced radiant noise.

MUFFLER NOISE REDUCTION

Original CAE technique is used to design a muffler with optimized volumes and sound isolation materials.

For more information, please go to the specific engine model.

Additional information

Weight150 kg
Dimensions100 × 100 × 100 cm
Engine Brand

Yanmar

Engine model

Yanmar – 3TNV84T

Electric start engine

Yes

Cylinders

3

Power (hp)

39HP @ 2800rpm

RPM

2800

Weight kg

150

Category types

Stationary Diesel Engine – Yanmar

Documentation

Enquire For Yanmar – 3TNV84T – 39HP

Hidden
Hidden